Scope

This specification covers the qualification and performance requirements of a thermosetting, sandable, medium

solids, solvent-borne primer surfacer.

Note: Nothing in this standard supercedes applicable laws and regulations.

Note: In the event of conflict between the English and domestic language, the English language shall take

precedence.

1.1 Purpose/Material Description. The primer surfacer covered in this specification is intended to be applied and

baked over electrodeposition (ELPO, E-Coat, Electrocoat) primer prior to topcoat. The nominal bake for this system

is 25 minutes at 1 45 °C (293 °F) substrate temperature. Volume Non-volatile solids range of this technology is

typically (35 to 45)%.

1.2 Symbols. Not applicable.

1.3 Applicability. The primer surfacer is intended to provide a smooth, adhesion promoting coating over baked

electrodeposition primer. It is also intended to provide an easily sanded surface.

1.4 Remarks. The primer surfacer is typically applied by electrostatic spraying and is subsequently topcoated with

either solventborne or waterborne basecoats combined with the appropriate clearcoat technology.