Full Description

This specification details the requirements of a high bake paintable ultralight sealer that is compatible with powder primer surface. The material is applied in the paint shop after Electrocoat (E-Coat) bake and before the application of primer surfacer. This material shall be capable of being either flow brushed or robotically applied and is intended to seal interior and exterior body joints against water, dust, air intrusion and corrosion. The material shall be compatible with primer surfacer and topcoat systems and bakes with resulting high appearance requirements.

Note: Nothing in this standard supercedes applicable laws and regulations.

Note: In the event of conflict between the English and domestic language, the English language shall take precedence.

Purpose/Material Description.

The material shall be a smooth and homogeneous mixture free of air, lumps, unmixed particles, or foreign materials. It shall be capable of being dispensed with approved and validated standard production displacement pumping and robotic application equipment as follows: Single point streaming, flat streaming, swirl, manual tip and flow brushing. It shall not have a noxious or toxic odor in either the uncured or cured state. In addition, the material shall not adversely affect personnel handling it.

The material shall adhere to all approved production E-Coat substrates. It shall have good durability and not accelerate the resting of steel over which it is applied.

Symbols.

Not applicable.

Applicability.

Vehicle seam sealing in Paint Shop.

Remarks.

Not applicable.